图片展示
图片展示

Collision Testing Laboratory System

A one-stop service point for collision testing of passive safety systems

一 一

 

The collision testing laboratory system has the testing capability to meet existing legal requirements and customer specific needs. The collision testing laboratory system can provide calibration equipment, trolley systems, dynamic impact data acquisition systems, dynamic impact sensors, collision dummies, high-speed cameras, and lighting, serving as a one-stop service point for passive safety system collision testing.

 

▍Product Introduction

图片展示

Calibration Equipment


A complete set of testing dummy calibration equipment is used to test the specified components of the dummy within the performance range specified in the standard, to ensure that the test dummy has biological response characteristics consistent with the real human body. The equipment meets the standards of CFR49part572, JJF1230-2009, JJF1803-2020, and JJF1231-2009.

Deceleration Pulley System

 

The deceleration pulley system includes the vehicle body, control system, track system, drive system, and deceleration system, which can simulate frontal impact, offset impact, and side impact. By adjusting the pulse, various different waveforms can be achieved, which are widely used in constraint systems, seats, and whip tests.

图片展示
图片展示

Dynamic Impact Sensor

 

Multiple dynamic impact sensors can measure pressure, force, torque, and acceleration, achieving excellent measurement results.

Dynamic Impact Data Acquisition System

 

The dynamic impact data acquisition system is an instrument used to collect sensor information on dummies and equipment. The number of channels can be customized according to actual needs, supporting commonly used strain gauges, piezoresistive sensors, voltage sensors and potentiometers, as well as IEPE and PE sensors.

图片展示
图片展示

High Speed Camera

 

Equipped with a high-speed panoramic camera, it can independently achieve a wide range without dead angles. By capturing the target points of the vehicle body and obstacles in the picture through high-speed photography, it can fully record the instantaneous collision angle, speed, deformation and other entire process between the vehicle and obstacles, and restore the entire process of changes during collisions.

Crash Dummy

 

We have a variety of dummies and accessories including Hybrid III 50th percentile, Hybrid III 5th percentile, Hybrid III 95th percentile, FAA, Q series child, P series child, TNO-10 seat belt, ECE-R16 seat belt, counterweight, and standing dummies. These dummies serve as substitutes for real humans in dynamic impact testing and can be used to measure the mechanical response of various parts of the human body during testing.

图片展示
图片展示

Lighting


LED light source is the latest high-speed photography lighting system, which can be used for collision tests and static deployment tests of airbags, minimizing the thermal load on dummies or safety airbag systems. Light control can be seamlessly integrated into the test bench control software without the need for additional software or hardware to operate.

Homepage | Product Services | Collision Testing Laboratory System | Service Support | About Us | News Center | Contact Us|

 Phone： 0731 - 8448-8719   

address：NO.602 Xueshi Road, Yuelu District, Changsha City, Hunan Province 

E-mail：server@hnsaf.com

 

Copyright © 2023  Hunan SAF Automobile Technology Company Limited   Xiang ICP Preparation No. 19026141-1

 

图片展示

Scan the code to follow us

添加微信好友，详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友，详细了解产品
我知道了